If DSIM Failed on Window 10/11! How to Fix it with McAfee?

DISM command is used for Window Images and Window Recovery Environment. But user sometimes faces DSIM failed on Window 10, and to fix this issue, you should switch to McAfee antivirus via www.mcafee.com/activate. In this blog, you will read the method to fix DSIM failed on Window 10/11.

Method To Fix DSIM Failed on Window 10/11:

1. Install your McAfee Antivirus:

Sometimes, this error is caused to due to antivirus. Because, antivirus interfere with your computer and leads to this problem. You can fix this issue by disabling your antivirus features. In case, this does not fix the issue, then you should remove your antivirus. After removing your antivirus, you should again do DISM scan.

If this solves your problem, then you should switch to McAfee antivirus software via www.mcafee.com/activate as it safeguards your system from errors.

2. Enter Correct Location of Install.wim file:

If you are facing DISM issue, then you should mount Windows 10 ISO file and enter the location of the Install.wim file. For this, you should enter the command in Command Prompt and then tap on Enter key to run it:

DISM /Online /Cleanup-Image /RestoreHealth /source:WIM:X:SourcesInstall.wim:1 /LimitAccess

Here, you should replace X with the letter which matches the drive where you find Windows 10 ISO file is mounted.

3. Copy Install.wim to your Hard Drive:

To fix this issue, you should copy the Install.wim to the root directory of your hard drive. To Install.wim file, you should download Windows 10 ISO, then mount it and after that, locate Install.wim file. When you copy the Install.wim file, you should the enter the correct location of the Install.wim file before you run the DISM scan.

4. Clean up System Image Components:

For this, you should open Command Prompt as administrator. If Command Prompt opens, then you should enter the command and then hit on Enter key:

Dism.exe /online /Cleanup-Image /StartComponentCleanup

Now, wait for the procedure to end. The user can also run the below commands:

DISM /Online /Cleanup-Image /StartComponentCleanup

DISM /Online /Cleanup-Image /AnalyzeComponentStore

When you run these commands, you should again perform DISM scan. Dism.exe /online /Cleanup-Image /StartComponentCleanup

Dism.exe /online /Cleanup-Image /StartComponentCleanup /ResetBase

5.  Run Windows Update Troubleshooter:

To run troubleshooter, you should tap on Windows Key + I together to open the Settings app. After this, visit to the System & Security section. Now, you should select Troubleshoot option from the menu which is on the left. Then in the right side, you need to choose Windows Update and then tap on Run the troubleshooter. Lastly, you should follow the steps on the screen to finish the troubleshooter.

6. Reset Windows Update Services:

To reset, you should open Command Prompt as an administrator. If Command Prompt begins, then you should run the below commands:

net stop wuauserv

cd %systemroot%SoftwareDistribution

ren Download Download.old

net start wuauserv

net stop bits

net start bits

net stop cryptsvc

cd %systemroot%system32

ren catroot2 catroot2old

net start cryptsvc

When the commands are executed, then you should restart Windows Update components and it will fix the issue.

7. Disable Proxy:

The user should open the Settings app and then go to Network & Internet section. After this, choose Proxy from the menu which is on the left. At last, in the right side you should disable all settings.

In order to install McAfee Antivirus, the user should install McAfee via www.mcafee.com/activate.

How McAfee helps If Window 11 Touchpad Not Working?

If the user faces Window 11 Touchpad Not Working issue, then it might be because of dust and driver issues. Sometimes, the issue also occur because of third party antivirus as it interferes in your device, so you must install dedicated antivirus i.e. McAfee antivirus through www.mcafee.com/activate. To fix the issue, you must read the below method to resolve the problem.

Method To Fix If Window 11 Touchpad Not Working:

1. Restart your Device:

For this, first you have to save your work and after that, close all windows. Then, you have to press Ctrl + Alt + Delete keys altogether. Here, you will view your shutdown menu. Now, you should use the keyboard arrow keys in your laptop and then choose the Restart option. At last, you should tap on OK button and press Enter key.

2. Enable Touchpad by using Settings:

The user should tap on the Windows key + I together. Then in the Settings app, you should tap on Bluetooth and devices. Now, you should tap on the touchpad which is on the right side. At last, you should Switch on the toggle which is under the touchpad.

3. Update your Touchpad Driver:

To update driver, you need to hit on Windows + R key at the same time. After this, key in the below command in Run dialog box and tap on OK button.

devmgmt.msc

The Device Manager will display and just scroll down to Mice and other pointing devices. At this point, you should double-tap on the device in order to expand the driver list. In case, you do not find the touchpad on the Device Manager, then hit on Action from the menu. Here, you need to right-tap on the touchpad driver which is on the list. Just you have to choose the Update driver option and tap on OK button. After this, choose search automatically for drivers. With stable Internet connection, you can download update file for the driver. Now, follow the steps to successfully finish the procedure. At last, restart your device and then check your touchpad is working properly.

4. Reset your Touchpad:

To reset, you need to press Windows key + I together. Now, you should tap on Bluetooth and devices in the Settings app. After this, you should tap on the touchpad which is on the left side. Here, you need to Scroll to the bottom which is in the right side. At last, you should tap on Default to restore your previous settings.

5.  Install dedicated Antivirus:

First of all, for this you should uninstall your third party antivirus, as it might sometimes interfere in the working of the device. It is advised you should install a dedicated McAfee antivirus in your device through www.mcafee.com/activate . It will scan your device on regular basis in order to protect from viruses and malware.

6. Disable Tablet Input Service:

To disable, you should press Win key + R key at the same time and then the Run dialog box will display on your screen. Now, Key in the below command and tap on OK button.

services.msc

It will open the Services app and then find Tablet PC Input Service or TabletInputService.  Here, you should right-tap on the option and then choose Stop. At last, just Restart your device and check the issue.

For installing McAfee in your device, visit to the official site of McAfee via mcafee.com/activate.

How To Fix Different McAfee Errors?

In some cases, while using McAfee products users faces McAfee error. So, in this blog you will read about different McAfee errors and their fixes. If the customer need assistance related to McAfee errors, then go to www.mcafee.com/activate

Method To Fix Different McAfee Errors:

1. Error Code: 1

In this, customer face SVM is shutting down. The causes of this issue MOVE AV Server service is not running or SVM is not functional. To fix this issue, you should check that McAfee MOVE Antivirus SVM system is turned on. After this, you should log in to the McAfee MOVE Antivirus SVM system. At last, you should check that MOVE AV Server service is running.

2. Error Code: 2

Customer encounters SVM is max client threshold reached. The causes of this issue are if number of clients which are connected to the SVM is more than the threshold value. To fix this issue, you should log in to the McAfee ePO server as an administrator. At last, you should deploy McAfee MOVE Antivirus SVM to your virtual machine.

3. Error Code: 3

Sometimes, the customer faces the issue of SVM to client heartbeat break. The causes of this issue are if SVM is turned off or if SVM is over loaded or if SVM and client version is not compatible. To fix this issue, you should check that McAfee MOVE Antivirus SVM system is turned on. After this, you should check that SVM is not over loaded. At last, you need to check that SVM and client version is compatible.

4. Error Code: 4

When the customer faces the issue client to SVM connection is failed. The causes of this error are SVM is turned on or MOVE AV Server service is not running. To fix this issue, you should check that McAfee MOVE Antivirus SVM is running. At last, you should check that MOVE AV Server service is running.

5. Error Code: 12002

In this issue, customer faces the issue SVM Registration with SVM Manager failed. The causes of this issue are SVM Registration with SVM Manager Request has timed out. To fix this issue, you should check that SVM Manager Service is up and running. After this, check that in Option Policy in McAfee Epo,  SVM Manager IP details are configured. At last, you should check that Options policy is assigned to the SVM.

6. Error Code: 12029

If the customer failed to submit file to ATD server. The cause of this issue is ATD is not integrated properly. To fix this issue, you should log in to McAfee ePO as an administrator. Now, you should choose Menu and then go to Policy and navigate to Policy Catalog. After this, from the Product list you should choose McAfee Threat Intelligence Exchange Server Management. Here, you need to tap on TIE Server Settings policy which is applied to SVM. Then under Advanced Threat  Defense tab, you should check the Username, Password and Server details are configured. Next in the McAfee MOVE Antivirus SVM system, you should run the command: mvadm stats

At last, you should check Total ATD candidates and Total ATD successful submissions values displays on the screen.

With this above method, you can fix different McAfee errors. For help related to McAfee error, visit to mcafee.com/activate.

If Dell Computer Not Charging When Plugged In! How to Fix It?

Sometimes, user encounters the issue of Dell Computer Not Charging When Plugged in. In order to resolve the problem, you should read the below method. For the security of your Dell computer, you should install McAfee antivirus via www.mcafee.com/activate.

Method To Fix If Dell Computer Not Charging When Plugged In:

1. Connect PC to Wall Socket:

To fix this issue, you should first power off the machine and then just plug it directly into wall socket. After this, check that the issue is solved or not.

2. Change Power Adapter:

Sometimes, this issue occurs when your AC adapter is faulty. You can identify a bad adapter, if it makes a buzzing noise when the user plugs it into power. In case, the AC adapter is silent, then also it might be faulty or not compatible. To fix this issue, you should use a different AC adapter just to charge your Dell battery. In case, new adapter charges your laptop’s battery, then the issue is with the AC adapter.

3. Reconnect your Battery and Adapter:

To reconnect, you should turn off the laptop and just Remove the laptop’s battery. After this, you should unplug the AC adapter from power. Now, you should disconnect the AC adapter from your laptop. At this point, you should tap on Power button on the laptop and just hold it for 10 seconds. Next, you should put your battery back into the laptop. Here, you need to connect the AC adapter to the laptop and then to the wall socket. At last, you need to Boot the laptop.

4. Update your BIOS:

To fix this issue, you should update your BIOS otherwise; it will lose your data and settings. Before you update your BIOS, you should back up your data. It will manage the hardware which is connected to your computer. If the BIOS get outdated, then it will result in this issue.

5. Update your Battery Drivers:

To update, you should press Windows + R key at the same time to open the Run dialog box. After this, you should write devmgmt.msc and press Enter key. Here, you should expand the Batteries section which is on the list. Now, you should right-tap on Microsoft ACPI-Compliant Control Method Battery. At this point, you should tap on Uninstall device from the context menu. Then, you need to tap on Uninstall button. Next, you should tap on Action from the menu bar and then choose Scan for hardware changes. Again, you need to right-tap on Microsoft ACPI-Compliant Control Method Battery. Now, you should choose Update Driver Software. At last, in the new window, you should tap on Search automatically for updated driver software.

6. Clean your Charging Port:

If there is dust in your laptop’s charging port, then it will result in this issue. If you find your Dell laptop is charging properly when plugged in, then also you should clean the laptop’s ports regularly. To do this, you should first power off the system and then disconnect the AC adapter from the power source. After this, you should thoroughly clean the charging port.

For the protection of your Dell Computer, you must install McAfee antivirus via www.mcafee.com/dellactivation.

How McAfee Helps If you are Unable To Join A Call in Twitch?

Twitch is the live streaming video platform but some users find issue like Unable to Join a Call in Twitch. To fix the issue, you should run the apps with administrative privilege and customize the software rendering option. For the safety of your device from viruses, the user must install McAfee antivirus software through www.mcafee.com/activate. In this blog, you will read the method to fix if you are unable to join a call in Twitch.

Method To Fix If You are Unable To Join A Call in Twitch:

1. Run Twitch with Administrator Privileges:

For this, first you should visit to your desktop and then find the Twitch executable. Now, you have to right-tap on it and then choose Run as administrator.

2. Toggle Software Rendering Option:

The user should tap on the Windows key and then write Twitch. After this, you should open the app. Now, you should check that you’re logged in with the account which you wish to join the call. At this point, you should tap on your profile image which is located on the upper-right side of the window. Here, you should go to Settings. At last, you should go to the General tab and then toggle the option of Software Rendering Mode.

3. Check your Antivirus is not Blocking the App:

Windows Defender:

For this, you should use the Windows + S keyboard shortcut just to open the search box. After this, you should write Firewall and then open from the shown result. Now in the Windows Defender Firewall, you should check the rules which are set up for Twitch in both the Inbound and Outbound tabs just by scrolling the list to the right side.

If you find Twitch in those lists, then you should set all Inbound rules to allow connections.

Install McAfee Antivirus Software:

In case, you have installed any third party software in your device just to protect your computer from viruses but it is blocking the connections for Twitch. In this situation, you should toggle all settings to Allow in order to resolve the issue. Or, the user can disable it to resolve the issue. But if the issue is related to your antivirus, then you should switch to a different antivirus solution. It is advised you should install McAfee antivirus through www.mcafee.com/activate  for streaming the video and it also secure your device from viruses.

The above method will help you to fix the issue of Unable to Join A Call in Twitch. For the scanning of your device for viruses, you should install McAfee antivirus software via www.mcafee.com/activate.

How McAfee Antivirus Fix Error Out of Memory Message in Window 7&10?

It is very essential to install the latest Window updates in your device, as it will keep your device smooth. But when you find issues in installing updates, then you must read the below blog. You should perform full system scan in your device through McAfee antivirus via www.mcafee.com/activate to keep your device secure from virus.

Method To Fix Error Out Memory Message in Window 7 &10:

  1. Repair Your Registry: To fix this issue, you should use System File Checker to scan the broken or out-of-date registry entries. To run System File checker, you should go to Start and then write cmd. After this, you should right-tap on Command Prompt and then choose Run as Administrator. Now, you should write sfc /scannow command and then tap on enter key. When the procedure gets completed, you will view the scanning results in command prompt. At last, Restart your computer system.
  2. Run Full System Scan: In order to fix this issue, you should perform a full system scan with McAfee antivirus through www.mcafee.com/activate to find the malware running in your device. This reliable antivirus keeps your system fully protected without slowing down your Computer. This antivirus gives protection against all types of threats and you can browse securely and anonymously.
  3. Run Windows Update Troubleshooter: For this, you should download the troubleshooter from Microsoft and just launch it. Now, you have to follow the on-screen steps to complete the process. At the end, restart your computer and again install the latest updates.
  4. Uninstall Unused Language Packs: If the user wanted to uninstall unused language packs, then you should visit to Start and then write Uninstall display language in the search box. After this, you should tap on Install or uninstall display languages and then choose Uninstall display languages. Here, you need to choose the language which you wish to uninstall and then tap on Next option. At last, follow the instructions to end the process.
  5. Check for Programs Leads to Memory Leaks: For this, you should launch Task Manager and then choose the Processes column. At last, choose the specific process and then tap on End task button in order to disable it.
  6. Repair your Disk: To repair disk, you should launch Command Prompt as an Admin. After this, you need to write the command and then press enter button:
    chkdsk c: /r
    Here, you need to wait for the scanning procedure to finish. At the end, just Restart your computer system and again install the updates.
  7. Clean your Temporary Files and Folders: To clean, you should visit to Start and then write Disk Cleanup. After this, you should choose the disk which you want to clean. At last, you should choose Clean up system files.
  8. Remove Recently Installed Software: In case, this issue arises when you installed new software in your computer, then just uninstall it. After this, you should restart your computer and then again run the executable file. Sometimes, apps cause incompatibility issues and stop you from completing the process. This issue also stops users from installing the latest updates in their PCs.

If the user need help in installing McAfee antivirus software in their device, then go to www.mcafee.com/activate.

How You Can Fix The Overheating Issues in Window 11 with McAfee?

Sometimes, customer faces the issue of overheating when upgrading to Window 11. To avoid the issue of overheating, the user should install McAfee in their device via www.mcafee.com/activate. In this blog, you will read the procedure to fix Overheating issues.

Procedure To Fix Overheating Issues in Window 11:

1. Restart Windows 11 PC:

You should go to the desktop and then press Alt + F4 key together to launch the Shut Down Windows box. After this, tap on the dropdown menu and then choose Restart option from the list. At last, tap on OK button to restart the computer.

2. Update Graphics Driver:

The user should tap on Windows + S altogether to launch the Search menu. After this, input Device Manager in the text field which is located at the top and then hit on the relevant search result. Here, you should launch Device Manager. Now, double-tap on the Display adapters entry. At this point, you should right-tap on the graphics adapter and then choose Update driver from the context menu. At the end, choose the option of Search automatically for drivers in the Update Drivers window and just install it.

3. Update Windows 11:

To update Window 11, you need to tap on Windows + I together to launch the Settings app. Now, you should choose Windows Update from the list of tabs which is in the navigation pane on the left side of the screen. Here, you should tap on Windows Update which is on the right side. At this point, you should hit on Check for updates to scan for newer versions. At the end, you should download and install the updates.

4.  Disable Startup Apps:

To disable startup apps, you should tap on Ctrl + Shift + Esc key altogether to launch Task Manager. After this, you should go to the Startup tab to view application which loads when you boot Windows. At this point, you should choose the individual application to remove and then hit on Disable option. Or, the users can right-hit on it and then choose Disable option from the context menu. At last, you can remove the other apps.

5. Terminate Apps and Processes:

For this, you should tap on Ctrl + Shift + Esc key altogether to launch Task Manager. Then in the Performance tab, you should scroll through the list of programs and just identify the apps which are interfering in the system resources. Now, you should choose the one which you wish to terminate and then tap on End task button. Keep in mind the user can disable other apps and processes which are listed there.

7. Disable Apps from Running in Background:

The customer should hit on Windows + I key in order to launch the Settings app. After this, you should choose the Apps tab from the navigation pane which is located on the left side. Here, you should tap on Installed apps which is on the right side. Now, you should find the app which you don’t want running in the background and then tap on the ellipsis next to it. Next, you should choose Advanced options from the menu. Just scroll down to Background app permissions and then tap on the menu just under Let this app run in the background. At this point, you should choose Never option from the list. At last, disable other apps from running in the background.

The user can also fix this issue by scanning their device with McAfee antivirus through www.mcafee.com/activate.

If Your Computer Has Been Blocked with Red Screen Alert! How to Fix it?

User sometimes gets the issue of Your Computer has been Blocked with Red Screen Warning. To fix this issue, you should enter into Safe Mode and use McAfee antivirus to scan your device via www.mcafee.com/activate. In this article, you will read the method To Fix If Your Computer Has Been Blocked with Red Screen Warning.

Method To Fix If Your Computer Has Been Blocked with Red Screen Alert:

1. Close Web Browser:

In case, Windows 10 system is not infected, then you can easily fix the red screen scam. The user can tap on the X icon which is close the browser. Then, you have to restart the web browser app. Sometimes, Your computer has been blocked alert because of the malware or harmful software. It is advised you should end any processes which are related to the webpage or they are causing the red screen alert. You should also scan your device with the McAfee antivirus tool via mcafee.com/activate to remove hidden malware. In case, browser re-opens the same red screen page, then you should enter Task Manager and after that, end any processes related to the error. For this, you should press Ctrl + Alt + Del key together and then go to Task Manager. Then, you should switch to the Processes tab and then end any process which is related to your browser. Now, you can use the web browsing engine without any problems. For more protection, you can access the internet by using Private Internet Access.

2. Enter Safe Mode and Perform Full System Scan:

The customer should enter their computer into safe mode and then all the third-party apps and processes will get disabled by default. For safe mode, you should press the Win+R key together and in the Run box you need to enter msconfig.  From System Configuration, you should switch to Boot tab and then under Boot options you should check Safe Boot. After this, you should save your changes and just reboot your computer. When you are in Safe mode, you should run a scan by using McAfee antivirus program. In case, McAfee antivirus finds any infected files, then you should remove from your computer. At last, reboot your computer into Windows mode.

3. Install and Run Additional Antimalware:

If the regular antivirus solution cannot be able to detect malware, then you should protect your files, system and data against malware, phishing and spyware with the additional security tool. With this additional tool, you should perform a full system scan to keep everything safe and secured. Keep in mind Microsoft will not display this issue. But if you get any notification, then it is fake and tries to trick you so that you download malicious files. To avoid this situation, you should always use reliable security solution.

With this above process, you can easily fix the problem of Your Computer has been Blocked with Red Screen Warning. If you want to install McAfee antivirus, visit to the official site of McAfee via www.mcafee.com/activate.

If Aggregator host.exe is Safe in Window 11! How to check it with McAfee?

McAfee antivirus is the powerful antivirus solution which secures your devices from all kind cyber threat and can install through www.mcafee.com/activate. It scans your device timely and provides cloud storage so that you can access your data anywhere. Sometimes, user wants to check if Aggregator host.exe is the legitimate file or not.  In this blog, you will read the method to check if Aggregator host.exe is Safe in Window 11.

 Method To Check If Aggregator host.exe is Safe in Window 11:

1. Run SFC Scan:

For this, first the user has to press the Windows + S key at the same time in order to open the Search bar and then write cmd and then right-tap on the result. Now, you should run it as an administrator. At the end, you should write or paste in the below command and then hit on Enter key:

sfc /scannow

2. Run DISM Scan:

To run DISM Scan, you should hit on the Windows + S key at the same time in order to open the Search bar and then write cmd and then right-hit on the relevant result. After this, you should run it as an Administrator. At last, you need write or paste in the below commands and then tap on Enter key after each command:

DISM /online /Cleanup-Image / ScanHealth                                                   

DISM /Online /Cleanup-Image /RestoreHealth

3. Run Virus Scan:

First of all, you should tap on the carrot arrow from your taskbar and in the right side you should find the antivirus which you have installed such as McAfee antivirus via www.mcafee.com/activate  and then right-hit on it. After this, you should select the option which opens the app interface. At last, you should hit on the button which performs a Smart scan or a virus scan. This antivirus protects your device from all kind of virus threat.

4. Check the Location of File:

You should hit on CTRL + SHIFT + ESC key at the same time in order to open the Task Manager window. Now, you should find the aggregator host.exe process and then right tap on it in order to choose Open file location. This process will take you to this folder and it is a safe process which is linked with the Windows OS: 

C:\Windows\System32

The above method will help you to fix the problem of Aggregator host.exe is Safe in Window 11. If customer needs helps to check the file, you should go to the site of McAfee antivirus via www.mcafee.com/activate.