How McAfee Helps to Fix PFN LIST Corrupt Window 11 Error?

In some cases, customers encounter PFN LIST CORRUPT issue in Window 11 due to defective drivers. To fix this issue, you should update your drivers and scan the device for viruses with McAfee antivirus via www.mcafee.com/activate. In this blog, you will read the method to fix PFN LIST CORRUPT window 11 error.

Method To Fix PFN LIST Corrupt Window 11 Error:

1. Update Windows:

To update Windows, you should right-tap on Start menu and then choose Settings options. Then from the Settings menu, you should select Windows Update and then hit on Resume updates.

2. Use PC Repair Tool:

PC repair tools helps to repair computer faults, protect file loss, malware and also hardware failure. With this tool, you can optimize your PC. Restoro software can identify and remove the malware threats. It helps to replace the corrupted Windows files and fix issues like PFN corrupt error.

3. Run SFC Scan:

For this, you should tap on Start menu and then type Command Prompt and just right-click on it. Now, you should select Run as administrator. Then, you should enter the below line and press Enter key when the Command Prompt window display on your screen:

sfc/scannow

Here, you should wait so that the procedure is finished. Lastly, Restart your computer system after you close the Command Prompt.

4. Run DISM:

First of all, you should tap on the Start menu and then write Command Prompt and right-click on it. Now, you should select Run as administrator. After this, you shouldwrite the below command and hit on Enter key:

DISM /Online /Cleanup-Image /RestoreHealth

At this point, wait till the scan completed. Lastly, restart your system and update again.

5. Update Drivers:

The users should right-tap on Start menu and then choose Device Manager. After this, you should right-tap on the first device and then choose Update driver. Here from the menu, you should select Search automatically for drivers which open up on your screen. At last, you should wait for Windows to update the driver and then repeat the procedure.

6. Check Hard Drive:

To check hard drive, you should right-tap on the Start menu and then from the list menu, select Settings option. Now, you should choose System from the left side and then scroll down to Recovery option which is in the right side and then click on it. After this, you should find Advanced startup and then choose Restart now option which is next to it. At this point, you will view a window with a few options and select Troubleshoot option. Here, you need to choose Advanced Options. Then in the Next window, select Command Prompt. Next in the Command Prompt window, you should type the lines and press Enter key after each command:

bootrec.exe /rebuildbcd

bootrec.exe /fixmbr

bootrec.exe /fixboot

After this, you should type the below command in Command Prompt:

chkdsk /r c:

chkdsk /r d:

At last, just restart your device and then check the issue is solved or not.

7. Uninstall Problematic Driver:

To uninstall problematic driver, you should right-tap on Start menu and then select Device Manager from the list. When the Device Manager is open, you should look for the driver which you wish to uninstall and right click on it and then select uninstall button. Finally, Restart your device.

To protect your device from viruses, you should install dedicated McAfee antivirus software via www.mcafee.com/activate

How McAfee Helps To Fix Window 11 Activation Error 0x87e107f9?

Users sometimes encounter Window 11 Activation Error 0x87e107f9 and to fix this issue, you need to scan your computer for viruses with McAfee antivirus via www.mcafee.com/activate. In this blog, you will read the method to fix Window 11 Activation Error 0x87e107f9.

window 11 activation error 0x87e107f9

Method To Fix Window 11 Activation Error 0x87e107f9:

1. Run SFC Scan:

To run SFC Scan, you should open Start menu. After this, you should search for Command Prompt. Now, you need to tap on Run as administrator. Here, you should type the sfc /scanow command and then tap on Enter button. At this point, your computer will begin scanning and then Reboot your Computer system.

2. Run DISM Command:

To run DISM command, you should open Start menu. After this, you should look for Command Prompt and then tap on Run as administrator. Here, you should execute the command:

DISM.exe /Online /Cleanup-image /RestorehealthDISM

Lastly, Reboot your Computer system.

3. Use Specialized Software:

To fix this issue, you should use specialized software like Restoro tool. It will fix 0x87e107f9 activation error on Windows 11 and check for the damaged DLL files, corrupted registry and system files. It also removes the duplicate files which slow down your PC.

4. Clear Temporary Folder:

For this, you need to tap on Win + R buttons in order to open the Run box. After this, you should write %temp% and press Enter key. Now, you should press Ctrl + A at the same time to select all files. At last, you should press the Delete button in your keyboard and then choose Delete button to delete all selected files.

5. Scan your Computer for Viruses:

To scan your device, you should hit on the upward arrow button which is on the bottom-right side of the Taskbar. After this, you should choose Windows Security. Now, you should tap on Virus & threat protection. At this point, you should hit on Quick scan button or press Scan options button. At the end, you should choose Full scan option to perform a deep scan of your computer for virus and malware. The user can use dedicated McAfee antivirus software via mcafee.com/activate.

6. Run Activation Troubleshooter:

To run troubleshooter, you should tap on Win+ I buttons in order to open System. After this, you should tap on Activation. At the end, you should choose Troubleshoot button.

7. Reset Windows 11:

To reset Window 11, you should hit on Win + I buttons together to open Windows Settings. Now, you should scroll down and then tap on Recovery button. Here under Recovery options, you should tap on the Reset PC button. At this point, you should choose the type of factory reset which you want to perform. Then, you should select the option how you would like to reinstall Windows. At last, you should tap on Next and Reset button.

Through this way, the customer can fix Window 11 Activation Error 0x87e107f9. For installing McAfee software, visit to www.mcafee.com/activate.

How McAfee Helps To Fix err_ internet _disconnected Error?

If the customer is getting the issue such as err_internet_disconnected error, then they can fix the issue by installing McAfee antivirus through www.mcafee.com/activate. This antivirus tool will not interfere with PC workings. In this article, you will read the method to fix err_internet_disconnected error.

Method To Fix err_ internet_disconnected Error:

1. Check Internet connection is Working:

To fix this issue, you should check your Internet connection is working. For this, you should access the Internet from other device like PC, Smartphone or tablet etc. in your network. If you find the issue on all devices, then the issue is with network cable. In this situation, you should check if everything is connected properly. In case, the issue is with your PC, then this means your router is working properly but the issue is with your PC’s network settings. To fix this issue, you should restart your modem/router. For this, you should press Power button in your router and just turn it off for 30 seconds. Again, press the Power button and just wait for the router to boot. When your router boots, then check the issue is fixed.

2. Clear Browsing Data and Cache:

To clear cache, you should tap on the Menu icon which is in the top right side of the screen. Then from the menu, you should select Settings option. If the Settings tab opens, then scroll down and tap on Advanced option. At this point, you should tap on Clear browsing data. Lastly, you should set Time range to All time and then hit on Clear data.

3. Use Different Browser:

To fix the problem, the user should use Opera Browser. It is a lightweight browser which has built-in messengers, battery saver, Customizable Speed Dials, and also mouse gestures. Using Opera browser, will fix the issue.

4.  Change Internet Options:

To change Internet options, you should tap on Win Key + I together to open the Settings app. If Settings app opens up on your screen, then go to Network & Internet section. Here from the menu, you should choose Proxy which is on the left side of the screen. At last, in the right side you should disable all options.

5. Switch to McAfee Antivirus:

Sometimes, antivirus and firewall interferes with your Internet connection, and you get this error. Hence to fix this issue, you should temporarily disable your antivirus and firewall. In case, this doesn’t fix the issue then just uninstall it. If removing the third-party antivirus fixes the issues, then for protection just switch to McAfee antivirus tool. You can install this software via www.mcafee.com/activate and it will not interfere with your system.  

6. Reinstall Network Adapter:

For this, you should hit on Win Key + X altogether to open Power User Menu. Then from the menu, you should choose Device Manager. If Device Manager opens up on your screen, then find and right tap on your network adapter and select Uninstall device. At last, check the box of Delete the driver software for this device and tap on Uninstall button.

Through this method, you can fix the issue of err_internet_disconnected error. To know about McAfee, visit to mcafee.com/activate.

How You Can Uninstall McAfee If The Removal Tool Is Not Working?

Sometimes, the customer wants to uninstall McAfee antivirus for some reason but they cannot install because the removal tool is not working. In this blog, the customer will read the method to uninstall McAfee if the Removal Tool is not working. For info, go to www.mcafee.com/activate.

Method To Uninstall McAfee without Uninstaller:

1. Uninstall McAfee through Normal Procedure:

To uninstall McAfee, first you should remove McAfee LiveSafe / Internet Security and McAfee WebAdvisor from your Computer system. Secondly, you should remove an extension for the browser through which you can know the reputation of the websites which you visit. Now, you should write Control in Windows Search and then tap on Control Panel from the search results. Here, you should tap on the Uninstall a program option in the window which opens up on your screen. At this point, you should choose the icon of McAfee LiveSafe, McAfee Internet Security, or other antivirus version which you have installed in your PC. Then, you should press the Uninstall / Change button which is located just under the application icon on Windows 10 or there at the top on Windows 7 and Windows 8.x. Here in the window which opens up on your screen, you should tap on Yes button. After this, you should put the checkmark just next to the entries of McAfee LiveSafe or McAfee Internet Security and then just Remove all files of this program. At last, you should tap on the Remove, Close and No, thanks button in order to finish the procedure of removing McAfee.

2. Uninstall McAfee by Using Removal Tool:

For this, first the user should download the McAfee Removal Tool. If the download is finish, then you should double-tap on the downloaded file. And then tap on Yes button and then hit on Next option. Here, you should accept the conditions of use. At this point, you should finish the process of removing McAfee Antivirus just by tapping on Next option and then write the verification code which displays on your desktop screen and then tap on Next button. Next, you should wait for few minutes so that all the components of McAfee gets detected and removed from your Computer. At the end, you should tap on the Close and Restart buttons in order to restart the PC.

 3. Uninstall McAfee apps from Smartphone and Tablets:

In order to uninstall McAfee app from Smartphone, the customer should first choose the icon of the app from the drawer. After this, you should keep your finger press on the icon for few seconds and then drag the icon into the trashcan icon which displays on your screen. Here, you should choose OK button if warning displays on your screen.

The user can use another method to uninstall McAfee. For this, you should visit to the Settings menu and then touch the Android app. Now, you should choose the McAfee antivirus and then tap on Uninstall button which is there on the screen. Remember, the current versions of McAfee antivirus software, has apps for Smartphone’s and tablets.

For more help related to McAfee antivirus, you should visit to McAfee site via mcafee.com/activate

How McAfee Fix Window Update Service Connectivity Error?

In some cases, users get the error message if they are trying to connect to Window Update service. To fix this issue, you should install McAfee antivirus via mcafee.com/activate to identify and remove the virus from your device. In this blog, you will read the method to fix Window Update Service Connectivity error.

Method To Fix Window Update Service Connectivity Error:

1. Check your Internet Connection:

First, you should check your Internet connection in order to verify if everything is running properly. If you use a Wi-Fi connection, then you should reset your router first. Then, you should restart your Windows 10 device and just disconnect the connected peripherals.

At this point, you should repeat the update process which is under Windows Updates. For this, you have to press the Windows key + I altogether and then tap on Update and security. Here from the left side of the main window, you should tap on Windows Updates and then check the available update for your system.

2. Check the Disk Space:

When you are installing update, but the free-space which is there in your hard drive is limited, so you cannot apply the update and then the user receive the error message. Hence, just ensure you have at least 10 GB of free space left in your device.

3. Run Windows Update Troubleshooter:

To run the troubleshooter on Windows 10, just by writing troubleshoot in the search area. It will scan your device and look for system error which interferes with the update operation and automatically fix everything. In the end, just restart your Windows 10 computer.

4. Run System Scan:

To run system scan, you should press the Windows key and then write cmd. After this, right-tap on Command Prompt and then choose Run as Administrator. Then in the Command Prompt, you should write sfc/scannow and tap on Enter key.

The scanning process will begin and if you find issues, then the troubleshooter will fix all the problems. In the end, Restart your PC.

5. Check Disk for Corrupted Sectors:

First, you should tap on Windows key and then type cmd. After this, you should right-tap on Command Prompt and then choose Run as Administrator. Now in the Command Prompt, you should write chkdsk c: /r and then tap on Enter key. Here, you should wait till the process is running and then restart the PC. At last, you should Retry the Windows 10 update operation.

6. Install McAfee Antivirus Protection:

In case, the user is using third-party security solutions, then you should temporarily disable the antivirus protection. As sometimes, Windows update is blocked by antivirus software, hence you should disable the programs. When the issue is fixed, then you should install reliable McAfee antivirus software via www.mcafee.com/activate to secure your files and Windows system from virus.

7. Manually Install Update:

The user should first press the Windows key+I altogether. Then, you have to choose Update & Security option. After this, you should visit to Windows Update and then tap on Advanced Settings. Now, you should choose Update History. At last, you should go to Microsoft official webpage and then find the latest updates.

Through this method, you can fix Window Update Service Connectivity issue. For installing McAfee, visit to www.mcafee.com/activate.

How McAfee Helps If Your Wi-Fi Connection is Not Working?

If the customer finds the issue of Wi-Fi Connection is Not Working. Then, to fix the issue you should first scan your device with McAfee Antivirus via www.mcafee.com/activate. In this article, you will read the method to resolve if your Wi-Fi connection is not working.

Method to Resolve If Your Wi-Fi Connection is Not Working:

1. Update Network Drivers:

First, you should right-hit on Start button and then open the Device Manager. After this, you should expand Network Adapters. Now, you should right-tap on your network adapters and tap on Update driver software. It is advised you should do it with LAN and WLAN adapters. At last, just wait for method to end and restart your PC.

2. Reset TCP/IP:

To reset IP, you should visit to Search and then write cmd and then right-tap on it and then run the Command Prompt (Admin). Now in the command line, you should write the below commands and tap on Enter key after each one:

netsh int ip reset

netsh int tcp set heuristics disabled

netsh int tcp set global autotuninglevel=disabled

netsh int tcp set global rss=enabled

At last, you should Reboot your Computer.

3. Change Wireless SSID and Password of your Modem:

To fix the network issues, you should change the wireless SSID and password of your modem. For this, you have to connect your computer system to the modem just by using Ethernet cable.

4. Check for Malware:

Sometimes, customer faces issues if the network connection is corrupted because of malware. Hence, you should run the McAfee antivirus via mcafee.com/activate in order to scan your device for malware. This advanced antivirus will identify and remove the virus from your device.

5. Reset your Modem:

First, you should Shut down your router or modem. After this, you should wait for a minute and then power it on. Now, you have to temporarily disable modem/router’s built-in firewall. Then, you have to Reset the modem/router to factory settings. At last, you should check your router/modem is not overheating and just place it far from temperature sources.

6. Use Internet Connection Troubleshooter:

To use troubleshooter, you should visit to Settings. Now, you should open Update & Security. After this, you should visit to Troubleshoot option. Then, you have to tap on Internet Connection Troubleshooter. At this point, just follow the instructions and then wait for the wizard to complete. At last, you should restart your computer device.

7.  Check DHCP is on:

The user should open Network Connections. After this, you should locate your network adapter and then right-tap on it and then select Diagnose option. Here, you should wait for the method to complete. If you find that DHCP procedure was disabled, then it will enable it.

8. Temporarily Disable Windows Firewall:

The customer should open Control Panel. After this, you should visit to System and Security. Now, you should tap on Windows Firewall. Here from the left side, you should choose Turn Windows Firewall on or off. At this point, you should Turn off Windows Firewall for both Private and Public networks. At last, you should Restart your system.

If the user wants to know the procedure for installing McAfee, then visit to www.mcafee.com/activate.

How McAfee helps If Printer is Not Connecting to PC?

If the user face issue of Printer is not connecting to PC, then to fix the issue you should install McAfee antivirus via mcafee.com/activate as it will not interrupts in system work. In this blog, you will read the method to fix If Printer is not connecting to PC.

Method To Fix If Printer is Not Connecting to PC:

1. Check Printer is listed as Unspecified Device:

First, you should check that your printer is an unspecified device. For this, you should tap on the Start button and then write control and choose Control Panel from the results. Now, you should select Devices and Printers. At last, just scroll down and check if your printer is under the Unspecified section.

2. Update Drivers:

For this, you should right-tap on Start button and then choose Device Manager from the list. After this, you should expand the Printers or Printer queues, just select your printer in the list and right tap on it. Then, you should choose Update driver. Now, you should choose the option of Search automatically for drivers. If your device finds a new driver, then it will install it. At the end, restart your PC.

3. Uninstall and Reinstall your Printer:

Uninstall Printer:

To uninstall, you should tap on Start and then hit on Settings. After this, you should select Devices. Now, you should tap on Printers & Scanners which is on the left side. At last, you should find and click your printer and then choose Remove device.

 Reinstall Printer:

To reinstall, you should hit on Start button and choose Settings. After this, select Devices. In the left side, you should tap on Printers & Scanners. Now, you should choose Add a printer or scanner. In case, the system detects your printer, then just select it but if it does not detect, then tap on The printer that I want isn’t listed. Here, you should select Add a local printer and then tap on Next option. At this point, from the drop down menu choose the port your printer is connected and then tap on Next. After this, tap on Windows Update button and then tap on the Have Disk button if you have the software disk. Then select the printer, then tap on Next option. Next, the system will install the printer and then tap on Next button. In the last window, you should tap on Print a test page button and then choose Finish option.

4. Disable your Previous Antivirus and Install McAfee Antivirus:

To disable your antivirus, you should tap on Start button and write security. After this, tap on Windows Security from the results. Now, you should choose Virus and threat protection. Here, you should scroll down and tap on Manage settings just under Virus & threat protection settings. At last, you need to Turn off Real-time protection.

For security, you should install McAfee antivirus via www.mcafee.com/activate which will not interfere in your device work.

5. Check Default Printer Settings:

You should tap on Start and then choose Settings. After this, you should select Devices. In the left side, you should tap on Printers & Scanners. At last, you should scroll to Let Windows manage my default printer and then uncheck the box.

Through this way, you can fix the issue of Printer is not connecting to PC. For installing McAfee, you should tap on www.mcafee.com/activate.

Mcafee activate 25 digit product key  

How McAfee Helps in Fixing Update Error 0x800f0900 in Windows 10?

In some cases, customer encounters Update Error 0x800f0900 in Window 10. To fix this issue, you should install McAfee antivirus via www.mcafee.com/activate for the security of your device. In this blog, you will read the method to fix Update Error 0x800f0900 in Window 10.

Method to Fix Update Error 0x800f0900 in Windows 10:

1. Ensure you Upgrade to 1803 in First Place:

You should have the following system requirements to run Windows 10 (1803):

RAM should be 1GB for 32 bit and 2GB for 64 bit.

Hard disk space for 16 GB for 32 bit and for 20 GB for 64 bit.

CPU should be 1GHz or faster.

Screen resolution for 800 x 600.

Graphics should be Microsoft DirectX 9 or later with WDDM 1.0 driver.

Internet connection should be proper.

2. Uninstall Previous Antivirus and Install McAfee Antivirus:

In some cases, third-party antivirus solutions lead to update issues. Hence, to fix this you should disable or uninstall the third-party antivirus so that it does not interfere in device working. And for security of your device, install reliable McAfee antivirus via mcafee.com/activate as it do not interrupts in the working of your system.

3. Run Windows Update Troubleshooter:

For this, you should tap on Windows key + I to open the Settings app. After this, you should choose Update & Security button. Now from the left side, you should select Troubleshoot option. Here, you should expand Windows Update Troubleshooter and then tap on “Run the troubleshooter”.

4. Clean Temp Files:

To run the Disk Cleanup and clean temp files. For this, you should open This PC or File Explorer. Now, you should right-tap on the partition from where you want to relieve of unnecessary data and then open Properties. Then, you should tap on Disk Cleanup. At this point, tap on the Clean up system files option. At last, you should check all boxes and then tap on OK button.

5. Run SFC and DISM:

To run SFC in Windows 10, you need to open Command Prompt as admin. Then in the command-line, you should write sfc/scannow and tap on Enter. At last, you should wait till the scan complete and then restart your PC.

To run the DISM utility, you should right-tap on the Command Prompt and then run it as an administrator. Now in the command line, you should copy-paste the lines one by one and then hit on Enter key after each command:

DISM /online /Cleanup-Image / ScanHealth

DISM /Online /Cleanup-Image /RestoreHealth

At last, just wait till the process ends.

6. Use Media Creation Tool:

You should download Media Creation Tool. After this, you should right tap on the tool and then select run it as an administrator. Now, you should accept the License Terms. Then, you should select to Upgrade this PC. If you find the issue, then plug in the USB drive and just restart Media Creation Tool. Here, you should tap on Create installation media for another PC option. At this point, choose the preferred language, architecture and edition and then tap on Next button. Next, you should select USB flash drive and then tap on Next. When the bootable drive is created, then restart your PC. After this, you should open the USB with installation media and then tap on Setup. At last, you should update Windows 10.

With this method, the user can fix this Update Error 0x800f0900 in Window 10. To know about McAfee antivirus, go to www.mcafee.com/activate. #Mcafee Activate 25 digit code

How McAfee Helps to Fix If Window 10 Won’t Restart?

In some cases, users face Window 10 won’t Restart issue. Hence to fix this issue, you scan your PC for PUPs via McAfee antivirus through mcafee.com/activate. In this blog, you will read the method to fix If Window 10 won’t Restart. 

Method To Fix If Window 10 Won’t Restart:

1. Run Power Troubleshooter:

For this, you should open Settings. After this, you should select Update & Security. Then from the left side, choose Troubleshoot button. At last, you should expand the Power Troubleshooter and then tap on the “Run the troubleshooter” button.

2. Perform Clean Boot and SFC/DISM:

In the Windows Search bar, you should type msconfig and then open System Configuration. Now under the Services tab, you should check the Hide all Microsoft services box. At this point, you should tap on Disable all option to disable all active third-party services. At last, you need to Reboot your PC.

After performing clean boot, you should run SFC and DISM in Windows 10. Then in the Windows Search bar, you should write cmd. Now, you should right-tap on Command Prompt and then run it as admin. Here in the command-line, you should type sfc/scannow and then tap on Enter key. At this point, you should type the below command and then tap on Enter button after each:

DISM /online /Cleanup-Image / ScanHealth

DISM /Online /Cleanup-Image /RestoreHealth

Finally, Reboot your PC after the procedure.

3. Boot into Safe Mode:

First of all, you should hit on Windows key + I together to open Settings. Now, you should select Update & Security option. Then, you have to choose Recovery option from the left side. Here under the Advanced startup, you should tap on Restart now option. After this, you should select Troubleshoot button. At this point, you should choose Advanced options and then select Startup settings. Next, you should tap on Restart button. Now, you have to select Safe mode or Safe mode with Networking from the list. At last, you should restart your PC from the Safe mode.

4. Disable Intel Management Engine:

The customers should right-hit on the Start button and then open Device Manager. Now, go to System devices and then expand the section. Here, you should right-tap on the Intel(R) Management Engine Interface and then select Disable device from the contextual menu. At this point, just Shut down your PC and again start it. At last, you should restart it again.

5. Scan for PUPs with McAfee Antivirus:

To scan PUPs, you should download McAfee antivirus via www.mcafee.com/activate and install it. After this, you should Run the tool and then tap on Scan Now button. At last, you should wait till the tool scans your computer system and then tap on Clean & Repair.

6. Rollback Windows Update and Reset PC to Factory Settings:

For this, you should open Settings. Now, you should select Update & Security. Then from the left side, you should select Recovery option. Now, you should tap on Get started button just under the “Go back to the previous version of Windows 10 section.

After this, reset it to factory values. For this, you should go to Settings and then tap on Update & Security and then hit on Recovery. Next, you should tap on Get started button under Reset this PC. At last, you should select to keep your files and then continue with process.

With this method, the user can fix Window 10 won’t Restart issue. For more details about McAfee, tap on mcafee activate 25 digit code.

How To Fix Unresponsive Taskbar in Window 10 with McAfee Antivirus?

In Window 10, some users face Unresponsive Taskbar. With this issue, you cannot access notifications, start menu or services. To fix this issue, you should perform system restore and install McAfee antivirus via mcafee.com/activate. In this article, you will learn the procedure to fix Unresponsive Taskbar in Window 10. 

Procedure To Fix Unresponsive Taskbar in Window 10:

1 Perform System Restore:

For this, you should tap on Windows Key + S altogether and then input create a restore point. Now, you have to select Create a restore point from the menu. Here, the System Properties window will display on our screen. You have to select System Restore from the menu. If System Restore window opens, then tap on Next option. Then, you have to check the checkbox of Show more restore points. Next, choose the restore point and then tap on Next option. At last, follow the guidelines to restore your PC.

2. Uninstall your Nvidia Graphics Driver:

The customer should tap on Windows Key + X together to open Win + X menu. Now, you should select Device Manager from the list. If it opens, then you should locate your graphics card driver and right-tap on it and then select Uninstall Device from the menu. At last, you should check Delete the driver software for this device and then tap on Uninstall button.

3. Check your Antivirus:

Sometimes, the users face the problem of unresponsive Taskbar because of the antivirus installed in your device. These third-party antiviruses interfere with your system and cause this issue to occur. Hence to fix this issue, you should disable antivirus features but if it does not help, then you should completely disable the antivirus. And install McAfee antivirus software via www.mcafee.com/activate as this antivirus do not interrupts in the system’s working.

4.  Use PowerShell:

Enable Firewall:

For this, tap on Windows Key + R and write Services.msc and tap on Enter button to open the Services window. Then, double tap on Window Firewall from the list of services to open properties. Here, in the Startup Type option, you should set it to Manual and then tap on Apply. In the Services window, you will find a Start this service button in order to start Windows Firewall.

After you enable Windows Firewall, then you should find this path:

C:WindowsSystem32WindowsPowerShellv1.0powershell.exe

Now, right-hit on powershell.exe and then select Run as Administrator. Then, you should copy this line into PowerShell and tap on Enter key to execute it:

Get-AppXPackage -AllUsers | Foreach {Add-AppxPackage -DisableDevelopmentMode -Register”$($_.InstallLocation)AppXManifest.xml”}

At last, you should check if the problem is resolved.

5. Check for Missing Updates:

First of all, you should tap on Windows Key + I together to open the Settings app. Now, visit to Update & Security section. Lastly in the right side, you should tap on Check for updates button.

With this above procedure, the user can fix the issue of Unresponsive Taskbar in Window 10. If the user requires help related to McAfee antivirus, then go to www.mcafee.com/activate.