How McAfee Fix Window Update Service Connectivity Error?

In some cases, users get the error message if they are trying to connect to Window Update service. To fix this issue, you should install McAfee antivirus via to identify and remove the virus from your device. In this blog, you will read the method to fix Window Update Service Connectivity error.

Method To Fix Window Update Service Connectivity Error:

1. Check your Internet Connection:

First, you should check your Internet connection in order to verify if everything is running properly. If you use a Wi-Fi connection, then you should reset your router first. Then, you should restart your Windows 10 device and just disconnect the connected peripherals.

At this point, you should repeat the update process which is under Windows Updates. For this, you have to press the Windows key + I altogether and then tap on Update and security. Here from the left side of the main window, you should tap on Windows Updates and then check the available update for your system.

2. Check the Disk Space:

When you are installing update, but the free-space which is there in your hard drive is limited, so you cannot apply the update and then the user receive the error message. Hence, just ensure you have at least 10 GB of free space left in your device.

3. Run Windows Update Troubleshooter:

To run the troubleshooter on Windows 10, just by writing troubleshoot in the search area. It will scan your device and look for system error which interferes with the update operation and automatically fix everything. In the end, just restart your Windows 10 computer.

4. Run System Scan:

To run system scan, you should press the Windows key and then write cmd. After this, right-tap on Command Prompt and then choose Run as Administrator. Then in the Command Prompt, you should write sfc/scannow and tap on Enter key.

The scanning process will begin and if you find issues, then the troubleshooter will fix all the problems. In the end, Restart your PC.

5. Check Disk for Corrupted Sectors:

First, you should tap on Windows key and then type cmd. After this, you should right-tap on Command Prompt and then choose Run as Administrator. Now in the Command Prompt, you should write chkdsk c: /r and then tap on Enter key. Here, you should wait till the process is running and then restart the PC. At last, you should Retry the Windows 10 update operation.

6. Install McAfee Antivirus Protection:

In case, the user is using third-party security solutions, then you should temporarily disable the antivirus protection. As sometimes, Windows update is blocked by antivirus software, hence you should disable the programs. When the issue is fixed, then you should install reliable McAfee antivirus software via to secure your files and Windows system from virus.

7. Manually Install Update:

The user should first press the Windows key+I altogether. Then, you have to choose Update & Security option. After this, you should visit to Windows Update and then tap on Advanced Settings. Now, you should choose Update History. At last, you should go to Microsoft official webpage and then find the latest updates.

Through this method, you can fix Window Update Service Connectivity issue. For installing McAfee, visit to

If DSIM Failed on Window 10/11! How to Fix it with McAfee?

DISM command is used for Window Images and Window Recovery Environment. But user sometimes faces DSIM failed on Window 10, and to fix this issue, you should switch to McAfee antivirus via In this blog, you will read the method to fix DSIM failed on Window 10/11.

Method To Fix DSIM Failed on Window 10/11:

1. Install your McAfee Antivirus:

Sometimes, this error is caused to due to antivirus. Because, antivirus interfere with your computer and leads to this problem. You can fix this issue by disabling your antivirus features. In case, this does not fix the issue, then you should remove your antivirus. After removing your antivirus, you should again do DISM scan.

If this solves your problem, then you should switch to McAfee antivirus software via as it safeguards your system from errors.

2. Enter Correct Location of Install.wim file:

If you are facing DISM issue, then you should mount Windows 10 ISO file and enter the location of the Install.wim file. For this, you should enter the command in Command Prompt and then tap on Enter key to run it:

DISM /Online /Cleanup-Image /RestoreHealth /source:WIM:X:SourcesInstall.wim:1 /LimitAccess

Here, you should replace X with the letter which matches the drive where you find Windows 10 ISO file is mounted.

3. Copy Install.wim to your Hard Drive:

To fix this issue, you should copy the Install.wim to the root directory of your hard drive. To Install.wim file, you should download Windows 10 ISO, then mount it and after that, locate Install.wim file. When you copy the Install.wim file, you should the enter the correct location of the Install.wim file before you run the DISM scan.

4. Clean up System Image Components:

For this, you should open Command Prompt as administrator. If Command Prompt opens, then you should enter the command and then hit on Enter key:

Dism.exe /online /Cleanup-Image /StartComponentCleanup

Now, wait for the procedure to end. The user can also run the below commands:

DISM /Online /Cleanup-Image /StartComponentCleanup

DISM /Online /Cleanup-Image /AnalyzeComponentStore

When you run these commands, you should again perform DISM scan. Dism.exe /online /Cleanup-Image /StartComponentCleanup

Dism.exe /online /Cleanup-Image /StartComponentCleanup /ResetBase

5.  Run Windows Update Troubleshooter:

To run troubleshooter, you should tap on Windows Key + I together to open the Settings app. After this, visit to the System & Security section. Now, you should select Troubleshoot option from the menu which is on the left. Then in the right side, you need to choose Windows Update and then tap on Run the troubleshooter. Lastly, you should follow the steps on the screen to finish the troubleshooter.

6. Reset Windows Update Services:

To reset, you should open Command Prompt as an administrator. If Command Prompt begins, then you should run the below commands:

net stop wuauserv

cd %systemroot%SoftwareDistribution

ren Download Download.old

net start wuauserv

net stop bits

net start bits

net stop cryptsvc

cd %systemroot%system32

ren catroot2 catroot2old

net start cryptsvc

When the commands are executed, then you should restart Windows Update components and it will fix the issue.

7. Disable Proxy:

The user should open the Settings app and then go to Network & Internet section. After this, choose Proxy from the menu which is on the left. At last, in the right side you should disable all settings.

In order to install McAfee Antivirus, the user should install McAfee via

How McAfee Antivirus Fix Error Out of Memory Message in Window 7&10?

It is very essential to install the latest Window updates in your device, as it will keep your device smooth. But when you find issues in installing updates, then you must read the below blog. You should perform full system scan in your device through McAfee antivirus via to keep your device secure from virus.

Method To Fix Error Out Memory Message in Window 7 &10:

  1. Repair Your Registry: To fix this issue, you should use System File Checker to scan the broken or out-of-date registry entries. To run System File checker, you should go to Start and then write cmd. After this, you should right-tap on Command Prompt and then choose Run as Administrator. Now, you should write sfc /scannow command and then tap on enter key. When the procedure gets completed, you will view the scanning results in command prompt. At last, Restart your computer system.
  2. Run Full System Scan: In order to fix this issue, you should perform a full system scan with McAfee antivirus through to find the malware running in your device. This reliable antivirus keeps your system fully protected without slowing down your Computer. This antivirus gives protection against all types of threats and you can browse securely and anonymously.
  3. Run Windows Update Troubleshooter: For this, you should download the troubleshooter from Microsoft and just launch it. Now, you have to follow the on-screen steps to complete the process. At the end, restart your computer and again install the latest updates.
  4. Uninstall Unused Language Packs: If the user wanted to uninstall unused language packs, then you should visit to Start and then write Uninstall display language in the search box. After this, you should tap on Install or uninstall display languages and then choose Uninstall display languages. Here, you need to choose the language which you wish to uninstall and then tap on Next option. At last, follow the instructions to end the process.
  5. Check for Programs Leads to Memory Leaks: For this, you should launch Task Manager and then choose the Processes column. At last, choose the specific process and then tap on End task button in order to disable it.
  6. Repair your Disk: To repair disk, you should launch Command Prompt as an Admin. After this, you need to write the command and then press enter button:
    chkdsk c: /r
    Here, you need to wait for the scanning procedure to finish. At the end, just Restart your computer system and again install the updates.
  7. Clean your Temporary Files and Folders: To clean, you should visit to Start and then write Disk Cleanup. After this, you should choose the disk which you want to clean. At last, you should choose Clean up system files.
  8. Remove Recently Installed Software: In case, this issue arises when you installed new software in your computer, then just uninstall it. After this, you should restart your computer and then again run the executable file. Sometimes, apps cause incompatibility issues and stop you from completing the process. This issue also stops users from installing the latest updates in their PCs.

If the user need help in installing McAfee antivirus software in their device, then go to